Vacuum installation VTT-PLASMA-COG.
- Details
- Hits: 2897
Installation of ionic-plasma drawing of covering VTT-PLASMA-COG is intended for drawing of wearproof, korrozionno-proof, protectively-decorative coverings (metal, nitrides, oxides, carbides etc.) on various metal wares and a number диэлектриков. The basic appointment - a protectively-decorative dusting of tooth artificial limbs and hardening мелкоразмерного the tool.
Installation is specially developed for replacement of out-of-date models ВУ-1БС and ННВ-6.
TECHNICAL CHARACTERISTICS:
1. The sizes of the chamber, D*H 600*350 mm.
2. Limiting vacuum - 8-10-4 Pases.
3. Time of achievement of limiting vacuum (no more) - 40 minutes
4. Speed of sedimentation of nitride of the titan - 3-6 microns/hrs.
5. Power consumption, no more - 8,5 KW.
- In a mode откачки - no more than 6 kw.
6. The feeding electric system - 380 V, 50Hz.
7. The expense of cold water, no more - 0,4 m3/hrs.
8. Weight, not more - 950 kg.
9. The adjusting area - 6 м2.
№ |
Name |
Quantity |
1. |
The arc evaporator with invertor a power unit. Evaporator current (smoothly regulated) - 25-100 And. Installation in addition can be equipped with an ionic source of clearing and magnetron's. |
2 |
2. |
Power unit basic/high. Pressure of a high-voltage source (smoothly regulated) - 10-1200 V |
1 |
3. |
Industrial equipment planetary type.4-12 positions. (The industrial equipment variant directly under products of the customer) is possible Quantity simultaneously напыляемых products (artificial limbs stomatologic) - to 500 pieces |
1 |
4. |
The forvakuum unit 2NVR - 5DM/ND 200 |
1 |
5. |
Highvacuum exhaust the module on base диффузионного pump ND-250. |
1 |
6. |
System pneumatic on the basis of elements SMC |
1 |
7. |
System hydraulic on the basis of elements SMC |
1 |
8. |
System automatic givings of technological gases with work possibility simultaneously with 2-4 gases. |
1 |
9. |
Control system on the basis of the industrial controller of German corporation SIEMENS. The touch control panel (Touch screen interface) Management manual and automatic. All-around automation of process of drawing of coverings. (In coordination with the customer) |
1 |