Vacuum installation VTT-1500
- Details
- Hits: 2633
Vacuum installation VTT-1500 is intended for drawing of protectively-decorative coverings on:
- Sheets from stainless steel in the size 1000х2000 mm in quantity 4pcs-8pcs;
- Products of the difficult form in the size 1300х2000 mm from metal, ceramics, has flown down etc.;
-melkorazmernye products with loading to 20000 pcs;
- Pipes in diameter to 150 mm.
Technical characteristics.
1. The internal size of the chamber: D=1500 mm, H=2200.
2. Limiting residual vacuum 8х10-4 the Pas in the chamber.
3. The capacity consumed by installation:
- In a mode exhaust - 16 kw;
- In a mode of clearing and covering drawing - 60 kw.
Installation structure.
|
№ |
Name |
Quantity |
|
1 |
The planar arc evaporator with system of circulation of an arch and invertor power units Current of an arch 20-400 A Length of the cathode l=2150 mm Diameter of the cathode d=70-80 mm |
4-5 |
|
2 |
Power unit high /basic. |
1 |
|
3 |
Industrial equipment of planetary type, 12 satellites (the industrial equipment variant directly under products of the customer is possible) |
1 |
|
4 |
Forvacuum unit AVZ 180/AVZ 20D/ND 500 |
1 |
|
5 |
Highvacuum exhaust the module on base диффузионного pump NVDM-630 |
1 |
|
6 |
Shutter higvacuum Du 630 air-controlled and possibility дросселирования откачки |
1 |
|
7 |
Heaters intrachamber with possibility of management in temperature of a substrate to 600 ˚ С |
2 |
|
8 |
System pneumatic on the basis of elements SMC |
1 |
|
9 |
System hydraulic on the basis of elements SMC |
1 |
|
10 |
System automatic givings of technological gases with work possibility simultaneously with 4-8 gases |
1 |
|
11 |
Control system on the basis of the industrial controller of German corporation WAGO Kontakttehnik GmbH. The touch control panel (Touch screen interface) Management manual and automatic. All-around automation of process of drawing of coverings. |
1 |